Viper S Series RAPID 1000W Stainless Winch Kit Inc 75m Rope and Chain + Wiring Loom

Viper “S” Series RAPID 1000W All Stainless Steel Submersible Winch Bundle Includes 75m 3 Strand Rope Spliced To 8mtrs Of 6mm Short Link Gal Chain And Now Includes 316 Stainless Steel Marine Gearbox and motor with IP68 Waterproof Certification And Much Much More!

Specifications

• 1000W Submersible Stainless Steel Electric Motor with IP68 Certification
• 28mm Solid S/S Shaft With 3 Support Bearings
• 8mm Marine Grade 316 Plate S/S Hand Polished to a Mirror Finish
• Viper 316 Stainless Steel Marine Worm Drive Gear Box
• 360 Degree Motor Rotation with 16 Different Positions
• Max fall rate: 50mtrs per minute
• Max Retrieval rate: 45 mtrs per minute
• Suit Vessel Length: 5.7 mtrs +
• Weight: 17 kgs (winch only)
• Well Clearance Required: Width 395mm x depth 410mm x height 260mm

Includes

• Viper “S” Series All Stainless 1000 submersible anchor winch supplied with 1 mtr 3 b&s power leads & joining connectors pressure tested & sealed
• 75mtrs of 8mm triple strand premium rope 8 mtrs of 6mm galvanised short link anchor chain
• Viper pro series anchor swivel - small
• Viper deluxe anchor roller - small
• 200amp reversing solenoid
• LEDilluminated marine rocker switch
• Viper laser etched led illuminated switch cover
• 100 amp flush mount circuit breaker with rubber seal
• Single LED switch stainless steel face plate
• Combo LED switch & circuit breaker S/S face plate
• 5mm stainless steel sandwich plate
• All fixing hardware
• Installation notes & wiring diagram

30021-8S

Wiring Loom 

To Suit Boats Up To 6.0 Mtrs – (MICRO/RAPID 1000) - 30034

Bell Marine anchor winch wiring looms are individually hand crafted and fully tested before we ship. Simply order your loom depending on the length of your boat when you order your winch and all you will need is the tools and know how to complete your installation.

We only use marine grade 3 B&S (25mm2) tinned copper wire, blind tinned copper lugs, silicone impregnated marine heat shrink and each connector is labelled for ease of installation. Every loom includes flexible conduit for ease of installation and your 1.5M switch loom is also included.  Simply connect “A” to “A” and ”B” to “B” without the need to refer to your wiring diagram and your winch will come to life.

Positive Cable:                                                                      Negative Cable

Battery to Circuit Breaker:     4.5M                                 Battery to Solenoid:                5.5M

Circuit Breaker to Solenoid:   1.0M                                 Not Applicable

Solenoid To Winch Motor:     2.5M                                 Solenoid to Winch Motor:     2.5M

• Please note that Switch Looms are 1.5M in length and should suit most boat.

• Viper Winch Motors are fitted with 1 M of 3B&S cable totaling  3.5 M from Solenoid to Winch Motor

• Please note We have tried to accommodate for almost all boats up to 6.0M, however we cannot guarantee that one size fits all.

• WARNING: Install your Viper winch and loom into the boat before you start to fit any other components! You may need to relocate them to suit cable lengths and individual boats.

To Suit Boats Up To 8.0 Mtrs – (MICRO/RAPID 1000) - 30035

Bell Marine anchor winch wiring looms are individually hand crafted and fully tested before we ship. Simply order your loom depending on the length of your boat when you order your winch and all you will need is the tools and know how to complete your installation.

We only use marine grade 3 B&S (25mm2) tinned copper wire, blind tinned copper lugs, silicone impregnated marine heat shrink and each connector is labelled for ease of installation. Every loom includes flexible conduit for ease of installation and your 1.5M switch loom is also included.  Simply connect “A” to “A” and ”B” to “B” without the need to refer to your wiring diagram and your winch will come to life.

Positive Cable:                                                                             Negative Cable

• Battery to Circuit Breaker:     5.8M                                 Battery to Solenoid:                6.8M

• Circuit Breaker to Solenoid:   1.5M                                 Not Applicable

• Solenoid To Winch Motor:     3.2M                                 Solenoid to Winch Motor:     3.2M

• Please note that Switch Looms are 1.5M in length and should suit most boat.

• Viper Winch Motors are fitted with 1 M of 3B&S cable totaling  4.2 M from Solenoid to Winch Motor

• Please note: We have tried to accommodate for almost all boats up to 8.0M, however we cannot guarantee that one size fits all so please check above measurements.

• WARNING: Install your Viper winch and loom into your boat before you start to fit any other components! You may need to relocate them to suit cable lengths and individual boats.

To Suit Boats Up To 6.0 Mtrs – (MICRO/RAPID 1000) - 30034
To Suit Boats Up To 8.0 Mtrs – (MICRO/RAPID 1000) - 30035